Product ID:INTERNATIONAL BLACK BUTYL SPLICE AD
MSDS Date:01/05/1996
FSC:8040
NIIN:00F055918
MSDS Number: CGVXH

ASHLAND CHEMICAL CO DIV OF ASHLAND OIL INC

COLUMBUS, OH 43216-2219
US

Emergency Phone: 800-274-5263/614-889-3333

Info Phone: 614-889-3333/800-274-5263

Cage: 34897

ASHLAND CHEMICAL CO

2219 COLUMBUS, OH 43216-2219 US

Telephone: 614-790-3333/800-274-5263

Cage: 34897

TOLUENE,TOLUOL (IARC CARC- GROUP 3) *98-1*

CAS: 108-88-3

RTECS: XS5250000

Fraction By Weight: 54%

OSHA PEL 100 PPM

ACGIH TLV: 100 PPM

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

LIGHT ALIPHATIC NAPHTHA, VM & P NAPHTHA, LACOLENE *98-1*

CAS: 64742-89-8

Fraction By Weight: 14-18%

OSHA PEL 300 PPM

ACGIH TLV: 300 PPM

HYDROCARBON RESIN

CAS: 68131-76-0

Fraction By Weight: 8-12%

BUTYL RUBBER

Fraction By Weight: 6-10%

XYLENE, DIMETHYLBENZENE, XYLOL (IARC - GROUP 3) *98-1*

CAS: 1330-20-7

RTECS: ZE2100000

Fraction By Weight: 4-5%

OSHA PEL 100 PPM

ACGIH TLV: 100 PPM, SKIN

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

HALOBUTYL RUBBER

Fraction By Weight: 1.5-6%

POLYUREA

Fraction By Weight: 1-3.4%

HEXANE, N-HEXANE *98-1*

CAS: 110-54-3

RTECS: MN9275000

Fraction By Weight: 4.1-6%

OSHA PEL 1800 MG/CUM

ACGIH TLV: 176 MG/CUM

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES: IRRITANT. SKIN:
IRRITATION/BURNING/ABSORPTION. INGESTION: HARMFUL. MATERIAL
ENTERING LUNGS DURING SWALLOWING/VOMITING CAN CAUSE
INFLAMMATION/DAMAGE. GI IRRITANT. INHALATION: HARMFUL. IRRITATION
TO NOSE/THROAT/RESPIRATORY TRACT. CNS DEPRESSION. MAY CAUSE DEATH.
HIGH CONCENTRATIONS MAY CAUSE CARDIAC ARRYTHMIAS.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:IRRITATION, STINGING, TEARING, REDNESS,
SWELLING, BURNING, DRYING/CRACKING OF SKIN, VOMITING, INFLAMMATION,
NAUSEA, DIARRHEA, DROWSINESS, WEAKNESS, FATIGUE, HEADACHE,
UNCONSCIOUSNESS, SHORTNESS OF BRE ATH, COMA
Medical Cond Aggravated by Exposure:PRE-EXISTING DISORDERS OF THE
LIVER, KIDNEY, CNS, CARDIAC SENSITIZATION.

First Aid:EYES: IMMEDIATELY MOVE AWAY FROM EXPOSURE TO FRESH AIR. FLUSH
GENTLY W/WATER FOR 15 MINS. SKIN: FLUSH W/LARGE AMOUNTS OF WATER.
INGESTION: DON'T INDUCE VOMITING. IF DROWSY/UNCONSCIOUS, PLACE
VICTIM ON LEFT SIDE W/THE HEAD DOWN. DON'T LEAVEUNATTENDED.
INHALATION: MOVE TO FRESH AIR. KEEP WARM & QUIET. GIVE CPR/OXYGEN
IF NEEDED. OBTAIN MEDICAL ATTENTION IN ALL CASES.

Flash Point Method:SCC
Flash Point:20F
Lower Limits:1
Upper Limits:7
Extinguishing Media:REGULAR FOAM, WATER FOG, CO2, DRY CHEMICAL
Fire Fighting Procedures:WEAR A SCBA W/A FULL FACEPIECE OPERATED IN THE
POSITIVE PRESSURE MODE W/APPROPRIATE TURN-OUT GEAR & CHEMICAL
RESISTANT PROTECTIVE EQUIPMENT.
Unusual Fire/Explosion Hazard:MATERIAL READILY GIVES OFF VAPORS WHICH
TRAVEL ALONG THE GROUND/BE MOVED BY VENTILATION & IGNITED BY
IGNITION SOURCES DISTANT FROM MATERIAL HANDLING POINT. (SUP

Spill Release Procedures:ABSORB LIQUID ON VERMICULITE/FLOOR ABSORBENT.
LARGE LEAKS. ELIMINATE IGNITION SOURCES. EVACUATE UNTIL CLEANUP IS
COMPLETE. STOP LEAK AT SOURCE. IF RUNOFF-PUMP/VACUUM PRODUCT,
ABSORB UNRECOVERED PRODUC T. TRANSFER CONTAMINATED PRODUCT TO
CONTAINERS.

Handling and Storage Precautions:5-GAL PAILS & LARGER METAL CONTAINERS;
TANK CARS/TRUCKS SHOULD BE GROUNDED & BONDED WHEN MATERIAL IS
TRANSFERRED.
Other Precautions:CONTAINERS MAY BE HAZARDOUS WHEN EMPTIED. SINCE THEY
RETAIN PRODUCT RESIDUES, PRECAUTIONS GIVEN MUST BE OBSERVED.
HYDROCARBON SOLVENTS CAN BECOME ELECTROSTATICALLY CHARGED DURING
MIXING, FILTERING/PUM PING AT HIGH FLOW RATES & IGNITE VAPORS.

Respiratory Protection:IF WORKPLACE EXPOSURE LIMIT IS EXCEEDED, USE A
NIOSH/MSHA APPROVED AIR SUPPLIED RESPIRATOR IN ABSENCE OF PROPER
ENVIRONMENTAL CONTROL.
Ventilation:PROVIDE SUFFICIENT MECHANICAL (GENERAL/LOCAL EXHAUST) TO
MAINTAIN EXPOSURE BELOW TLVS.
Protective Gloves:RESISTANT/IMPERVIOUS
Eye Protection:CHEMICAL SPLASH GOGGLES IAW/OSHA
Other Protective Equipment:IMPERVIOUS CLOTHING & BOOTS
Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHING BEFORE
REUSE.
Supplemental Safety and Health
FIRE HAZ CONT'D: NEVER USE WELDING/CUTTING TORCH ON/NEAR DRUM, EVEN
EMPTY, PRODUCT RESIDUE CAN IGNITE EXPLOSIVELY. HEALTH HAZ CONT'D:
PROLONGED/REPEATED EXPOSURE MAY CAUSE DAMAGE TO THE BRAIN & PERIPH
ERAL NERVE TISSUES, BIRTH DEFECTS.

Boiling Pt:B.P. Text:140-220F
Vapor Pres:227
Vapor Density:1
Spec Gravity:0.86
Evaporation Rate & Reference:SLOWER THAN ETHYL ETHER
Appearance and Odor:LIQUID
Percent Volatiles by Volume:73-77

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Stability Condition to Avoid:PILOT LIGHTS, FLAMES, SPARKS, STATIC
DISCHARGE & OTHER IGNITION SOURCES. CONTACT W/HEATERS & ELECTRIC
MOTORS
Hazardous Decomposition Products:CO2, CO, VARIOUS HYDROCARBONS

Waste Disposal Methods:PREVENT FROM ENTERING
DRAINS/SEWERS/STREAMS/OTHER BODIES OF WATER. PREVENT FROM
SPREADING. DISPOSE OF IAW/LOCAL, STATE & FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.